103
Chapter 3 Application Development Information
3
Web Service Settings - Device Admin - Key Input Device
You can set the key input device or check their operation.
Web Service Settings - Device Admin - Serial Communication Device
You can use this to set communication with a serial communication device and check its operation.
Item Description
Key input
device to be
registered
Device ID Set the ID for the key input device.
Device name Set the device name for the key input device.
Control script Set the device control script to control the key input device.
Add Adds a device to the Device List.
Registered key input devices Displays a list of registered key input devices.
Operating test Performs an operating test for a registered key input device.
When SSL is enabled on this product, make sure that the certificate
issued by the signature source certification authority of the SSL
certificate imported to this product is registered in the computer or
device.
Delete Deletes a registered key input device.
Item Description
Serial communication device Set whether to use the Serial communication device.
Communica-
tions settings
Communications
speed (bps)
Set the communication speed.
Data bit Set the data bit length.
Parity Set the parity.
Stop bit Set the stop bit.
Flow control Set the flow control.
Communication test Performs a communication test.
When SSL is enabled on this product, make sure that the certificate
issued by the signature source certification authority of the SSL
certificate imported to this product is registered in the computer or
device.
Apply Saves settings to TM-U220-i.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
