Epson TM-U220-i Technical Reference Guide

108
Web Service Settings - Server Access - Status Notification
You can set Status Notification for the TM-U220-i.
Item Description
Status Notification Sets whether to use the Status Notification function or not.
Select [Enable] or [Disable].
ID Set ID for the server-side program to identify TM-U220-i when [Status
Notification] is set to [Enable]. This ID becomes the user ID used for
Digest access authentication. The set value will also be passed as an
ID parameter value for the form data posted to the server.
Password Set the user ID and password used for Digest authentication. Make
sure to set a password as Digest authentication cannot be performed
for the user ID without a password.
URL Specify the Test_print.php address of the Web server when [Status
Notification] is set to [Enable].
Example: http://[IP address of the Web Server]/Test_status.php
Click the [Access Test] button to check if the address is accessible.
Interval(s) Set the request interval when [Status Notification] is set to [Enable].
Authenticate Server Sets whether the server authentication is performed with the
registered certificate when accessed through https.
Apply Saves settings to TM-U220-i.

Epson TM-U220-i Specifications

General

Type	POS printer
Color	Yes
Print technology	Dot matrix
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Maximum roll diameter	83 mm
Standard interfaces	Ethernet, Parallel, RS-232, RS-485, USB, Wireless LAN
Serial interface type	RS-232, RS-485
Connectivity technology	Wired & Wireless
Electromagnetic compatibility	VCCI class A, FCC class A, CE marking, AS/NZS 3548 class B
Mean cycles between failures (MCBF)	18000000
Safety	UL, CSA, TÜV (EN60950)
Mean time between failures (MTBF)	180000 h
Product color	Gray

Weight and Dimensions

Depth	248 mm
Width	160 mm
Height	138.5 mm