116
PHP settings
Opening PHP Setting Screen
Follow the steps below to open the PHP Setting screen of EPSON TMNet WebConfig.
1
Start up a PC connected to the network.
2
Start up the Web browser, and input the following in the address bar.
When SSL is disabled: http://[This product’s IP address]/webconfig/PHPSetting
When SSL is enabled: https://[This product’s IP address]/webconfig/PHPSetting
PHP settings
You can configure the PHP settings for this product.
Item Description
PHP Enables/disables PHP function.
Web Contents Save Storage Shows the storage to save the Web contents.
microSD Status Displays whether microSD card can be used.
Free Space / Total Size Shows the free space and total size of the microSD card.
Apply Saves settings to TM-U220-i.
The spooler cannot be used if PHP is enabled.