Epson TM-U220-i Technical Reference Guide

135
Chapter 4 Handling
4
Adjusting the Auto cutter blade
The auto cutter blade may lock up without returning to the standby position as a result of a paper
clip or other object entering inside the printer or a paper jam. Turn off the printer, wait 10 seconds,
and then turn the printer back on. The auto cutter blade should automatically return to the correct
positi
on.
If it does not, follow the steps below to manually return the auto cutter blade to the correct position.
1
Turn off the printer.
2
Open the roll paper cover.
3
Turn the knob in the direction of the arrow until you see a shaft in the open-
ing.
4
Close the roll paper cover.
Shaft
Knob

Epson TM-U220-i Specifications

General

Type	POS printer
Color	Yes
Print technology	Dot matrix
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Maximum roll diameter	83 mm
Standard interfaces	Ethernet, Parallel, RS-232, RS-485, USB, Wireless LAN
Serial interface type	RS-232, RS-485
Connectivity technology	Wired & Wireless
Electromagnetic compatibility	VCCI class A, FCC class A, CE marking, AS/NZS 3548 class B
Mean cycles between failures (MCBF)	18000000
Safety	UL, CSA, TÜV (EN60950)
Mean time between failures (MTBF)	180000 h
Product color	Gray

Weight and Dimensions

Depth	248 mm
Width	160 mm
Height	138.5 mm