Epson TM-U220-i Technical Reference Guide

53
Chapter 2 Setup
2
Connecting the Peripherals
Connect each cable of a peripheral to a port or connector at the rear of the product.
Connecting the Customer Display
For details on connecting the customer display, refer to the "DM-D110/DM-D210 Technical
Reference Guide". (U
"Software and Manuals" on page 95)
Use EPSON TMNet WebConfig to configure customer display settings and perform display tests.
(U
"Settings for Connected Devices" on page 73)
CAUTION
 When connecting USB interface devices, make sure to check the devices or manuals,
etc. for current consumption. The total value should be 600 mA or less. Never use
devices that provide no information on current consumption.
 Make sure that the protective cover is securely fit into place while the product is oper-
ating.

Epson TM-U220-i Specifications

General

Type	POS printer
Color	Yes
Print technology	Dot matrix
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Maximum roll diameter	83 mm
Standard interfaces	Ethernet, Parallel, RS-232, RS-485, USB, Wireless LAN
Serial interface type	RS-232, RS-485
Connectivity technology	Wired & Wireless
Electromagnetic compatibility	VCCI class A, FCC class A, CE marking, AS/NZS 3548 class B
Mean cycles between failures (MCBF)	18000000
Safety	UL, CSA, TÜV (EN60950)
Mean time between failures (MTBF)	180000 h
Product color	Gray

Weight and Dimensions

Depth	248 mm
Width	160 mm
Height	138.5 mm