115
Chapter 3 Application Development Information
3
Admin Settings - Maintenance - Reset
You can reset the network functions and restore the settings for EPSON TMNet WebConfig to the
factory default settings.
Admin Settings - Administrator Information - Administrator
You can set the information for the administrator of the TM-U220-i.
Admin Settings - Administrator Information - Password
You can change a password of EPSON TMNet WebConfig.
Item Description
Reset Restarts the network functions while retaining the network setting values such as IP
address. The settings for EPSON TMNet WebConfig other than the network settings
are retained.
Factory Default Restores the settings for EPSON TMNet WebConfig to the factory default settings.
All the settings except for the internal time are initialized.
Self-signed certificates, Web contents, and PHP contents registered to this product
are also deleted. If a microSD card is inserted in this product, only the files in the
webapp folder are deleted. Other folders and files are not deleted.
Item Description
Administrator Name Sets the name of the administrator of the TM-U220-i.
Location/Person Sets the location where the TM-U220-i is installed.
Apply Saves settings to TM-U220-i.
Item Description
Old Password Enter the current password.
New Password Enter the new password.
Re-input Password Enter the new password for confirmation.
Apply Saves settings to TM-U220-i.
A user name and a password will be required on the authentication screen when you start up
this utility and when you change settings. Enter “epson” for the user name and the password
you set for the password.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
