106
Web Service Settings - Web Contents - Update Settings
You can use this to register web contents in this product and set updating for them.
See also
"Registering Web Contents" on page 75.
Item Description
Automatic
Update Settings
Automatic Update Selects the method of updating web contents.
Selecting [Enable] enables "Automatic Update Settings".
Selecting [Disable] enables "Web Contents Manual Update".
Frequency Sets the frequency of automatic update for web contents.
Timing Sets the timing of automatic update for web contents.
Update Time Sets the start time of automatic update for web contents.
ID Sets ID for identifying this product at the Web server when
[Automatic Update] is set to [Enable].
This ID will be the user ID used for Digest authentication. This set
value will also be passed as an ID parameter value for the form
data posted to the server.
Password Set the user ID and password used for Digest authentication.
Make sure to set a password as Digest authentication cannot
be performed for the user ID without a password.
Automatic
Update Settings
File URL Specifies the URL for a file to update automatically.
After specifying it, clicking [File Access Test] checks whether
the URL is specified correctly.
Authenticate Server Sets whether the server authentication is performed with the
registered certificate when accessed through https.
Apply Saves settings to TM-U220-i.
Web Contents
Manual Update
Web Contents
Archive File (*.zip)
Specifies the web content files to register.
Upload Registers the specified web contents on the TM-U220-i.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
