g. Print-out of measurement result
The measurement result can be printed out by pressing the print switch after the measurements.
A maximum of the data for each eye can be saved and the most reliable value among them is indicated as
the optimum value. The optimum value is printed out only when more than three times of measurement is
taken for each eye. The format of the output (All, All/Eco, Eco or Off) can be set on Print REF/KRT on the
setup screen.
• All: Print out a maximum of ten data of the refractive measurement and Kerato measurement for
each eye.
• All/Eco:
◦ Print out a maximum of ten data of the refractive measurement for each eye.
◦ Print out only the optimum values for the Kerato measurement.
• Eco: Print out only the optimum values for all of the measurement.
• Off: Print out no data.
<Sample of Printout 1>
Print REF/KRT setting：Eco
1. Date and time of the measurement
2. Refractive measurement result (optimum value)
◦ SPH: Spherical value
◦ CYL: Cylindrical value
◦ AX: Axis angle
3. Kerato measurement result (optimum value)
◦ R1 : Radius of curvature (Max.)
◦ R2: Radius of curvature (Min.)
◦ AVE: Average of R1 and R2
◦ CYL: Cylindrical value
4. Pupillary distance
To Next Page
Loading...
Need help?
General
