5
4
3
2
1
5
4
3
2
1
a. Configuration of protocols
The menu “1. Protocol” is composed of 3 sub-menus:
: configuration of PC connection
: configuration of the edger connection
: configuration of the blocker connection
To configure PC connection
Press on “1”, then press on .
Press on “1”, then press on to make your choice.
Then choose the desired protocol by navigating the menu using the keys and .
: no PC connection
: OMA protocol, with RS232 connection
: OMA protocol for Check Pro, with RS232 connection
: OMA protocol, with Ethernet connection
: PCCom protocol for Opsys V1
: specific Japan protocol
Enter the selected line number selected then, press on to confirm.
Press on ( ) to exit the menu.
To configure the edger connection
Press on “1”, then press on .
Press on “2”, then press on to make your choice.
Then choose the desired protocol by navigating the menu using the keys and .
: no edger connection
: edger connection with the provided cord
: specific Topcon edger protocol
Enter the selected line number selected then, press on to confirm.
Press on ( ) to exit the menu.
The display indicates by default:>
If not, it displays the last memorized choice.>
The display indicates by default:>
If not, it displays the last memorized choice.>
To Next Page
Loading...
Need help?
General
