Extreme Networks ExtremeSwitching VSP 7400 Series User Manual

Preface
This guide provides the instructions and supporting information needed to install Extreme Networks
®
VSP 7400 Series switches:
The guide includes information about site preparation, installation, maintenance, and the switches'
functionality.
Audience
This guide is intended for use by network administrators responsible for installing and setting up
network equipment. It assumes a basic working knowledge of:
•
Local area networks (LANs)
•
Ethernet concepts
•
Ethernet switching and bridging concepts
•
Routing concepts
•
Simple Network Management Protocol (SNMP)
•
Basic equipment installation procedures
See the VOSS software documentation for information about configuring VSP 7400 Series switches.
Note
If the information in an installation note or release note shipped with your Extreme Networks
equipment diers from the information in this guide, follow the installation or release note.
Conventions
This section discusses the conventions used in this guide.
Text Conventions
Unless otherwise noted, information in this document applies to all supported environments for the
products in question. Exceptions, like command keywords associated with a specific software version,
are identified in the text.
When a feature, function, or operation pertains to a specific hardware product, the product name is
used. When features, functions, and operations are the same across an entire product family, such as
ExtremeSwitching switches or SLX routers, the product is referred to as the switch or the router.
VSP 7400 Series Switches: Hardware Installation Guide 5

Extreme Networks ExtremeSwitching VSP 7400 Series Specifications

General

Brand	Extreme Networks
Model	ExtremeSwitching VSP 7400 Series
Category	Switch
Language	English