4. Trouble Shooting and Maintenance
4.1 Diagnostic screen
Diagnostic screen can be entered into any time by press the “i” key located
at the left bottom keyboard.
1. Ink : real time pressure of Ink. It is generally 300-350 under normal
startup mode. Temp: Temperature of ink in the ink system
2. Temp:Cabinet : Temperature inside the cabinet
Head: Temperature of print head of inkjet printer. It is generally 35 under
normal startup mode.
3. Phase Profile: Phase working status. It is generally 06~10 under normal
startup mode.
4. Levels: Ink Low: Ink level in the ink tank now is low
Solvent Low: Solvent level in the solvent tank now is low
5. Chamber：Low, High: Low, high level status in the viscosity chamber.
ON and OFF will alternate when the printer is running
6. VMS：Set: Setting value of ink viscosity during running. The value will
vary because of different ink and temperature. Now: Actual value of
the ink viscosity during running; normally, the actual value
approximates to the setting value of ink viscosity.
7. Mix：OK，Low, High——Low, medium and high ink level probe in the
mixing tank. ON means there is ink in the tank, OFF means no ink.!
To Next Page
Loading...
Need help?
General
