Fastjet A470 Series User Manual

4.2 Faults and Warning Icons
4.2.1 Fault Icons
Icon
Name
Cause
Remedial Action
Mixer
Tank
Empty
Ink leak
Check the ink system with
the help of engineer.
Solvent vaporization
Add ink until the icon
disappears.
Valve Clogging
Take V2 down and clean it
up with special cleaner.
Charge
Fault
Nozzle Clogging
Perform Nozzle Flush and
Wash Nozzle program.
Remove the head cover and
clean the print head. Close
the head cover when all
components is dry and clean.
Poor break point
Observe the Break point and
adjust it to the best condition.
incorrect ink stream
position
Observe the ink stream and
adjust it to the best position.
ink is out of expiration
date or polluted
Drain the ink and clean the
ink system. Renew ink.
fitter exhaustion
Cleaning up the ink system
and change the fitter.
Contact the engineer for
more information.
Charge
Fault
Nozzle Clogging
Perform Nozzle Flush and
Wash Nozzle program.
Remove the head cover and
clean the print head. Close
the head cover when all
components is dry and clean.
Gutter Clogging
Clean gutter until it is though.
EHT Trip
High Voltage
Deflection Plate
accumulate ink
Clean print head’s high
voltage Deflection Plate and
dry it. Contact the engineer
for more information.
Page 40

Fastjet A470 Series Specifications

General

Brand	Fastjet
Model	A470 Series
Category	Printer
Language	English