EasyManuals Logo
Home>Fermax>Intercom System>VDS

Fermax VDS Technical Manual

Fermax VDS
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
VDSVDS
VDSVDS
VDS
VDSVDS
VDSVDS
VDS
Page 5
Code 97508I-1 V07_09
VDS SYSTEM
We call this easy-to-install electronic door entry system or video door entry system designed by FERMAX ELECTRONICA
a VDS system, the main identifying feature of which is that it does not use call wires.
The traditional VDS system does not require the usual call wire for every telephone or monitor. The panel call is
converted into a digital signal which is sent via a common wire. This digital signal is only recognised by the telephone
or monitor programmed, generating the corresponding audio call signal.
* Simplified Wire Installation
- Door Entry System: 3 wires.
- Video Door Entry System:
·
New Building: UTP CAT5, 5 wires or 3 wires + coaxial.
·
Replacement: the VDS system allows you to change a 4+N electronic door system to a video door system
using the existing wiring.
Main Features of the VDS System
3
3
3
3
3
12 Vac
ON
OVERLOAD
18 Vdc
42
F2
F1
F2
F1
F2
F1
F2
F1
F2
F1
F2
F1
DISTRIBUIDOR VIDEO 2 SALIDAS
2 OUTPUTS VIDEO DISTRIBUTOR
75
REF.2448
V
1
R1
+18
VM
5
M
4
+
3
MMV
2
V
6
(-)
DISTRIBUIDOR VIDEO 2 SALIDAS
2 OUTPUTS VIDEO DISTRIBUTOR
75
REF.2448
V
1
R1
+18
VM
5
M
4
+
3
MMV
2
V
6
(-)
DISTRIBUIDOR VIDEO 2 SALIDAS
2 OUTPUTS VIDEO DISTRIBUTOR
75
REF.2448
V
1
R1
+18
VM
5
M
4
+
3
MMV
2
V
6
(-)
12 Vac
ON
OVERLOAD
18 Vdc
42
* Maximum Distance: 200 m
- UTP Cat5 / 5 wires
(*)
: up to 100 m
- 3 wires
(* )
+ coaxial: up to 200 m.
(*) see the section/distance table in the 'Installation and Start-Up Instructions for VDS systems' section.
* Up to 199 apartments with door entry system or video door entry system.
·
New Building: the VDS system can manage buildings with up to 199 apartments.
· Replacement: the system capacity depends on the existing wiring.
* Easy start-up process
Once the VDS system has been wired, a simple programming procedure is carried out to assign a number (call
number) to each telephone or monitor. If the residence has more than one telephone and/or monitor, these devices
can be programmed with the same number. In this case, all devices will ring when the residence’s doorbell is rung.
* One or two door entry system or video door entry system access points (entrances)
The VDS system enables up to two access points to be installed in the same building, with the possibility of combining
audio and video entry devices.
For buildings which initially had only one access point, adding a door entry or video door entry panel at a second
access point requires minimum installation.
VDS Video Door Entry System Installation
VDS Door Entry System Installation
UTP Cat5
5 wires
3 wires + Coax
UTP Cat5
5 wires
3 wires + Coax
UTP Cat5
5 wires
3 wires + Coax
UTP Cat5
5 wires
3 wires + Coax

Other manuals for Fermax VDS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fermax VDS and is the answer not in the manual?

Fermax VDS Specifications

General IconGeneral
BrandFermax
ModelVDS
CategoryIntercom System
LanguageEnglish

Related product manuals