EasyManuals Logo
Home>Fermax>Intercom System>VDS

Fermax VDS Technical Manual

Fermax VDS
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
VDSVDS
VDSVDS
VDS
VDSVDS
VDSVDS
VDS
Page 9
Code 97508I-1 V07_09
The VDS system in REPLACEMENT systems
Given its features and resources the VDS system is the ideal system for the replacement of a door entry system with
a video door entry system.
Allows the use of the door entry system’s existing wiring to convert it to a digital video door entry system.
Conventional door entry systems, which generally consist of 4 common wires + 1 call wire per telephone can be
converted to 5 wire Fermax VDS video door entry systems, without the need to replace the existing wiring.
To convert this system to a 5 wire bus, you must connect all the call wires on the entry panel and use them as a
negative wire on the system (see system diagram).
Facilitates systems with up to 199 residences, 2 entrance points and a central guard unit with a maximum distance
of 100 metres. The distance can be extended depending on the system characteristics.
VDS Video Door Entry System
5 «Digital Call» wires
L: Data and Audio
+,-: Power Supply
V, M: Video
4+N Door Entry System
4 common wires + N (1 call wire per residence)
Common Audio Wires:
1.2: Residence-Entry Panel Audio Direction
3,6: Entry Panel-Residence Audio Direction
Call Wires: N1, N2, N3 ...
4
4
4
1
1
1
4
1
1
1
4
4
4
4
1
1
1
4
1
1
1
4
(*)
F2
F1
F2
F1
F2
F1
F2
F1
F2
F1
F2
F1
DISTRIBUIDOR VIDEO 2 SALIDAS
2 OUTPUTS VIDEO DISTRIBUTOR
75
REF.2448
V
1
R1
+18
VM
5
M
4
+
3
MMV
2
V
6
(-)
DISTRIBUIDOR VIDEO 2 SALIDAS
2 OUTPUTS VIDEO DISTRIBUTOR
75
REF.2448
V
1
R1
+18
VM
5
M
4
+
3
MMV
2
V
6
(-)
DISTRIBUIDOR VIDEO 2 SALIDAS
2 OUTPUTS VIDEO DISTRIBUTOR
75
REF.2448
V
1
R1
+18
VM
5
M
4
+
3
MMV
2
V
6
(-)
(*) The «call routing» wires are used as a common
negative wire on the system.
NOTE: For replacement systems, it is recommended that the user carries out a prior evaluation of the wiring features
so as to be aware of the relevant characteristics and determine if any replacement or reorganisation is necessary.
For more information please refer to the section on: «The VDS system in REPLACEMENT Installations» in the
relevant manual.

Other manuals for Fermax VDS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fermax VDS and is the answer not in the manual?

Fermax VDS Specifications

General IconGeneral
BrandFermax
ModelVDS
CategoryIntercom System
LanguageEnglish

Related product manuals