All Firstech FT-7200S CONT controllers include the following:
• CM7200 main control module
• Wiring diagram sheet
• High Current ignition harness with one external relay
• Low current ignition harness
• Wiring harnesses
• Hood pin
RF Kits with remote(s), Antenna, and Antenna Cable are not included with the FT-7200S CONT.
The following sensors are available but not included with every system:
• FT-DAS Firstech Digital Adjustable Sensor (Required for Manual Transmissions)
• Auto lock and unlock system (FT-EZGO)
• Remote pager sensor (FT-RPS TOUCH) or (FT-RPS-2)
• Thermister temperature sensor (FT-TEMP SENSOR) (Drone and 2 Way remote LCD systems)
The remote(s) and antenna are modular and are not specific to the control modules. You have the ability
to pair almost any Firstech remote(s) and antenna receiver to the CM7200. This includes all 4 and 6 pin
antennas.
Any questions on contents please contact your distributor or us directly at 1.888.820.3690, Monday
through Friday, 8 AM to 5 PM Pacific Time.
Thank you for purchasing this Firstech system for your vehicle. The following installation manual is
intended for experienced and authorized Firstech technicians. We highly recommend that you contact your
local Firstech dealer and seek professional installation. Call 888-820-3690 or visit our website at www.
firstechonline.com to locate your nearest dealer. If you need additional or replacement remotes and/or
online support please visit techfeed.compustar.com.
Caution: The Manufacturer’s warranty will be void if this product is installed by anyone other than an
authorized Firstech dealer. Firstech provides installation support services to authorized dealers only.
This manual may change frequently. Please check techfeed.compustar.com for updates.
Copyright 2014 Firstech, LLC. Page 2Copyright 2014 Firstech, LLC. Page 2
CM7200 Master Guide
Starter System
techfeed.compustar.com
Copyright 2014 Firstech, LLC. Page 4
Introduction
Kit Contents
To Next Page
Loading...
Need help?
General
