Ford 7.3 DIT Power Stroke User Manual

Pre 1996 Mo del Year 1996 Modal Yeor
~- --------
dW'v'lJ
i~"§"(£t7!8C
181431.5 0[
-cL.A"t>AP -_
------ ---
Extra sealant required in these locations
Fleetrlte number CH1824392
7. 3L DIT ANTHOLOGY
Intake Hu n
The hoses connecting the Mbocharger
discharge Y
pipe to the intake manifolds have
been changed as of engine serial number
201681 to delete the humps and may be
used interchangeably.
Oil Pen s .. Unt
When reseal1ng the Oil pan, make sure that
the silicone rs apphed property. Extra sealant
is required at the ends of
the radius' on each
end of the pan. Make sure to avoid applying
too much sealant 10 pan rails since il can fall
off
in the pan and plug the oil piok up tube.
Always use dowels (make locally), to locate
the pan during Insta llation. Whenever lhe oil
pan is reseal ed, add a bottle of anti foam
concentrate to the oil available at Navistar
dealers
(P/N CH1824392).
-
47

Ford 7.3 DIT Power Stroke Specifications

General

Brand	Ford
Model	7.3 DIT Power Stroke
Category	Engine
Language	English