The SETUP menu item
Presetting After completing the entire start-up process (for example, using the Installation
Wizard), the inverter is preconfigured depending on the country setup.
The SETUP menu lets you easily customize the inverter’s preset parameters to
your needs.
Software Up-
dates
IMPORTANT! Because of software updates, certain functions may be available
for your device but not described in these operating instructions or vice versa. In
addition, individual figures may also differ from the operating elements of your
device. However, the function of these operating elements is identical.
Navigation in the
SETUP Menu
Accessing the SETUP Menu
1
In the menu level, use the ‘left’ or ‘right’
keys to select the ‘SETUP’ menu
2
Press the ‘Enter’ key
Standby
WiFi Access Point
DATCOM
USB
Relay
The first entry in the SETUP menu is dis-
played:
‘Standby'
Scrolling between Entries
3
Use the ‘up’ or ‘down’ keys to scroll
between the available entries
Exiting an Entry
4
To exit an entry, press the "Back" key
The menu level is displayed
If no key is pressed for 2 minutes,
29
EN-US
To Next Page
Loading...
Need help?
General