Safety rules
Explanation of
safety instruc-
tions
WARNING!
Indicates a potentially dangerous situation.
▶
Death or serious injury may result if appropriate precautions are not taken.
CAUTION!
Indicates a potentially harmful situation.
▶
Minor injury or damage to property may result if appropriate precautions are
not taken.
NOTE!
Indicates a possibility of flawed work results and possible damage to the equip-
ment.
Please pay special attention when one of the symbols from the "Safety rules"
chapter appears in these instructions.
General The device has been manufactured using state-of-the-art technology and ac-
cording to recognized safety standards. If used incorrectly or misused, however,
it can cause
-
serious or fatal injury to the operator or a third party,
-
and damage to the device and other material assets belonging to the operat-
ing company.
All persons involved in start-up operation, maintenance and servicing of the
device must
-
be suitably qualified,
-
have knowledge of and experience in dealing with electrical installations and
-
have fully read and precisely followed these Operating Instructions.
The Operating Instructions must always be kept on hand wherever the device is
being used. In addition to the Operating Instructions, all applicable local rules
and regulations regarding accident prevention and environmental protection
must also be followed.
All safety and danger notices on the device
-
must be kept in a legible state
-
must not be damaged/marked
-
must not be removed
-
must not be covered, pasted, or painted over.
The terminals can reach high temperatures.
Only operate the device when all protection devices are fully functional. If the
protection devices are not fully functional, there is a risk of
-
serious or fatal injury to the operator or a third party,
-
and damage to the device and other material assets belonging to the operat-
ing company.
Any safety devices that are not functioning properly must be repaired by an au-
thorized specialist before the device is switched on.
5
EN-US