Configuration of HTTP Communications Encryption
351
Encryption and Digital Signature Settings
12
2 Create a certificate.
1) Click the [Properties] tab.
2) Click [ ] on the left of [Security] to display the items in the folder.
3) Click [Machine Digital Certificate Management].
4) Click the [Create New Self Signed Certificate] button.
5) Set [Public Key Size] as necessary.
6) Set [Issuer] as necessary.
7) Set [Days of Validity] as necessary.
8) Click [Apply].
9) Refresh the web browser.
3 Set up the SSL/TLS information.
1) Click [ ] on the left of [Security] to display the items in the folder.
2) Click [SSL/TLS Settings].
3) Select the [Enabled] check box for [HTTP - SSL/TLS Communication].
4) Set up [HTTP - SSL/TLS Communication Port Number].
Note • Do not use the numbers of any other ports.
5) Click [Apply].
6) When the right frame of the web browser changes to the machine reboot display,
click [Reboot Machine]. The machine reboots and the settings are enabled.
Step2 Configuration on the Computer
To encrypt communications between a web browser and the machine, enter an
address beginning with "https" instead of "http" in the address box of the web browser.
z
Example of IP address entry:
https://192.168.1.1/ (IPv4)
https://[2001:DB8::1234]/ (IPv6)
z
Example of Internet address entry:
https://myhost.example.com/
When encrypting IPP communications (Internet printing) and adding a printer from [Add
Printer], enter an address beginning with "https" instead of "http" as the URL of the
printer.
For information on the settings, refer to the manual contained in the Driver CD Kit.
To Next Page
Loading...
Need help?
General
