To Next Page

To Previous Page

13 Authentication and Accounting Features

394

Authentication and Accounting Features

Configuration for Account Administration

This section describes the settings to use the Accounting feature on the machine.

The following shows the reference section for each procedure.

Step 1 Selecting an Accounting Type.......................................................................................394

Step 2 Registering User Information ........................................................................................394

Step 1 Selecting an Accounting Type

The following describes the configuration procedures to use the Accounting feature.

Note • For information on relationships between the Authentication and Accounting modes, refer to

"Authentication and Accounting Relationship" (P.370).

1 Press the <Log In/Out> button.

2 Enter the system administrator's user ID with the numeric keypad or the keyboard

displayed on the screen, and select [Enter].

When a passcode is required, select [Next] and enter the system administrator's

passcode, and select [Enter].

Note • The default user ID is "11111".

• The default passcode is "x-admin".

3 Select [Tools] on the [Services Home] screen.

4 Select [Accounting].

5 Select [Accounting Type].

6 Select an accounting type, and then select [Save].

Note • You can select the accounting type from [Local Accounting], [Network Accounting], and

[Xerox Standard Accounting].

For information on accounting types, refer to "Accounting Type" (P.257).

7 Select [Close] repeatedly until the [Tools] screen is displayed.

8 Select [Close].

Step 2 Registering User Information

Press the <Log In/Out> button.