Printable Area
573
Appendix
15
Printable Area
This section describes the area on paper that can be printed.
Standard Printable Area
The standard printable area is the area of a sheet of paper excluding the 4.0 mm
margins on all four edges of paper. For SRA3 paper (width of 320 mm), the printable
area of the paper is the area excluding the 11.5 mm left and right margins. The actual
printable area, however, may vary depending on the printer (plotter) control language.
Extended Printable Area
When you select the extended printable area setting for printing, you can expand the
width and length of the printable area to 305.0 x 476.6 mm and the print assured area
to 297.0 x 476.6 mm. For copying, the printable area and the print assured area can be
extended up to 297.0 x 432.0 mm. The area of paper you can print to, however, may
vary depending on the size of paper.
Note • To extend the printable area, change the PCL print driver setting, or the [Print Area] setting
on the touch screen.
For more information on the setting method on the print driver, refer to the help provided for the print
driver. For more information on the setting on the control panel, refer to "Print Area" (P.196).
îš„When the paper
width is less than 12
inches (A3)
îš„When the paper
width is 12 inches
(12 x 19")
îš„When the paper
width is 12.6 inches
(SRA3 (320 mm
width))
Printer
4mm
2mm
2mm
2mm
Unprintable area
Printable area/
Guaranteed
print area
Paper feed
direction
4mm
3.9mm
2mm
3.9mm
Unprintable area
Printable area/
Guaranteed print
area
Paper feed
direction
4mm
2mm
7.5mm
7.5mm
Unprintable area
Guaranteed print
area
Printable area
11.5mm
11.5mm
Paper feed
direction
Copy
4mm
2mm
2mm
2mm
Unprintable area
Printable area/
Guaranteed print
area
Paper feed
direction
25.3mm
3.9mm
25.3mm
3.9mm
Printable area/
Guaranteed print
area
Unprintable area
Paper feed
direction
9mm
11.5mm
9mm
11.5mm
Printable area/
Guaranteed print
area
Unprintable area
Paper feed
direction
To Next Page
Loading...
Need help?
General
