EasyManuals Logo
Home>Fuji Xerox>All in One Printer>DocuCentre-V C3374

Fuji Xerox DocuCentre-V C3374 Administrator's Guide

Fuji Xerox DocuCentre-V C3374
783 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #351 background imageLoading...
Page #351 background image
Installation When Using TCP/IP (LPD/Port 9100)
351
Printer Environment Settings
7
Installation When Using TCP/IP (LPD/Port 9100)
This section describes how to install the machine using TCP/IP.
The following shows the reference section for each procedure.
Step 1 Preparations .....................................................................................................................................................................351
Step 2 Configuration on the Machine.....................................................................................................................................351
Step 3 Configuration on the Computer ..................................................................................................................................352
CentreWare Internet Services Setting Items.........................................................................................................................352
Step 1 Preparations
The following items are required to use the machine via TCP/IP (LPD/Port9100).
TCP/IP network environment
Media (Software/Product Manual) provided with the machine
Step 2 Configuration on the Machine
The following describes the configuration procedures to use TCP/IP (LPD/Port9100) on the
machine. Enable the LPD Port or the Port9100 port, and then configure TCP/IP settings.
Note You can configure the settings using CentreWare Internet Services or the Media (Software/Product
Manual).
For the items that can be configured using CentreWare Internet Services, refer to "CentreWare Internet Services Setting
Items" (P.352). For information on how to configure the setting using the Media (Software/Product Manual), refer to the
manual contained in the Media (Software/Product Manual).
1 Display the [Tools] screen.
1) Press the <Log In/Out> button.
2) Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's
passcode, and select [Enter].
Note The default user ID is "11111".
The default passcode is "x-admin".
3) Select [Tools] on the Services Home screen.
2 Enable the LPD port or Port9100 port as appropriate.
In this example, the LPD port is enabled.
1) Select [Connectivity & Network Setup].
2) Select [Port Settings].
3) Select [LPD], and then select [Change Settings].
4) Select [Port Status], and then select [Change Settings].
5) Select [Enabled], and then select [Save].
6) Select [Close] repeatedly until the [Tools] screen is displayed.
3 Set an IP address and the other addresses.
Skip this step if an IP address is already set.
If DHCP or BOOTP is available in your environment, configure the method for obtaining the

Table of Contents

Other manuals for Fuji Xerox DocuCentre-V C3374

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuCentre-V C3374 and is the answer not in the manual?

Fuji Xerox DocuCentre-V C3374 Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuCentre-V C3374
CategoryAll in One Printer
LanguageEnglish

Related product manuals