15 Problem Solving
624
Problem Solving
15
5 Turn the knob to eject the document upwards
to remove.
Important • If the document is caught, do not pull it out
forcibly. The document could be damaged.
6 Close the inner cover of the document feeder.
7 Close the left cover of the document feeder until it clicks into place, and confirm that there
is no space between the near or far side of the cover and the document feeder.
8 If you cannot find the document, lift the document feeder gently, and remove the
document if it is there, and then close the document feeder.
9 If you still cannot find the document in step 8,
lift the document feeder tray and remove the
document.
10 Return the document feeder tray gently.
11 Make sure that the document is not torn, wrinkled or folded, and then load the document
again following the instructions displayed on the touch screen.
Note • After removing the jammed document, reload the entire document including the pages already
scanned. The machine will automatically skip the scanned pages and start scanning unscanned
pages.
• Torn, wrinkled or folded documents may cause document jams and damage. To scan such
documents, directly place the document on the document glass to make copies.
Duplex Automatic Document Feeder B1-PC (optional)
1
Pull up the handle of the top cover of the
document feeder, and then open the top cover
until it stops.
Note • When you fully open the cover, it enters a
fixed position. Open the cover gently.
To Next Page
Loading...
Need help?
General
