14 Authentication and Accounting Features
450
Authentication and Accounting Features
14
Step 2 Logout Method Using the Smart Card
Perform the following steps to set how to logout authentication using the smart card.
1 Press the <Log In/Out> button.
2 Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's passcode,
and select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
3 Select [Tools] on the Services Home screen.
4 Select [Authentication/Security Settings].
5 Select [Authentication].
6 Select [User Details Setup].
7 Select [Smart Card Logout Timing], and then select [Change Settings].
8 Select the authentication logout method, and then select [Save].
9 Select [Close].
Step 3 Registering Smart Card Information
The system administrator can register smart cards using CentreWare Internet Services.
Note • The smart card information can be set from CentreWare Internet Services. For more information,
refer to the help of CentreWare Internet Services.
• The information used for authentication can also be set from CentreWare Internet Services. For
more information, refer to the help of CentreWare Internet Services.
Important • To display the online help for CentreWare Internet Services, users need to have the environment to
connect to the Internet. The communication fee shall be borne by you.
To Next Page
Loading...
Need help?
General
