4 Fax
188
Fax
4
1 Open the document cover.
Important • Ensure that the touch screen is active, and
then load a document. Otherwise, the
machine may not properly detect the
document size.
2 Load the document face down, and align it
against the top left corner of the document
glass.
Note • When you load a A5, B5 or A4 document on
the document glass in portrait orientation,
the scanned image is transmitted with 180
degrees rotated.
3 Close the document cover.
Note • When a standard size document is loaded on the document glass, the size of the document is
displayed in the message field.
Step 2 Selecting Features
The following two services are available to send faxes.
Simple Fax
Allows you to only select basic features to send faxes.
Fax/Internet Fax
Allows you to make detailed settings to send faxes.
The following procedure uses [Fax/Internet Fax] to describe how to select features.
You can select the Fax or Internet Fax service, or the Server Fax service on the Services Home
screen.
For information on the Simple Fax feature, refer to "Simple Fax" (P.212).
Important • The Fax and Internet Fax services are not available while the Server Fax service is enabled.
Note • The features to be displayed on the screen depend on your machine configuration.
• When the Authentication or Accounting feature is enabled, a user ID and passcode may be required.
Ask your system administrator for the user ID and passcode.
1 Press the <Services Home> button.
To Next Page
Loading...
Need help?
General
