5 Scan
350
Scan
5
• The machine will not enter the Power Saver mode while the standby screen is displayed. For
information on Power Saver mode, refer to "Power Saver Mode" (P.81).
• When you select [Flatbed] for [Source], [Paper size] is grayed out and automatically set to the
maximum original size of the machine. To specify [Paper size], select [Feeder (Scan one side)] or
[Feeder (Scan both sides)] for [Source].
This Device (Storing Data Scanned by the Machine on a Network Computer)
You can forward the data scanned with the command from the machine to a specified
computer on the network.
Note • WSD stands for Web Services on Devices.
1 Load the document on the document glass or
in the document feeder, and select [This
Device].
2 Computer names and 5 processing methods
are displayed in the [List of Computers]. Select
destination from the list in accordance with the
intended use.
List of Computers
Lists destination and URL.
Note • Select from among 5 kinds of processing methods (Scan to PC, Scan for Print to PC, Scan for E-mail
to PC, Scan for Fax to PC, Scan for OCR to PC) in accordance with the intended use.
3 Press the <Start> button.
4 The scanned data will be forwarded to the specified destination.
Note • Select [Delete] to abort scanning.
5 Check the forwarded data on the destination computer.
To Next Page
Loading...
Need help?
General
