5.2 Description of Menu Items 89
USB Settings (DocuPrint C1110 only)
Specifies the settings for the USB interface.
Note
• You need to restart the printer to activate the new settings. After making the settings, switch the printer
off and then on again.
Initialize NVM Initializes network data stored in NVM. The NV memory is nonvolatile memory that
retains the settings of the printer even when its power is switched off. Initializing the NV
memory will return each item of the [Wired Network] menu to its default value.
Adobe Protocol Sets the PostScript communication protocol.
• [Auto] (default)
Automatically detects the PostScript communication protocol.
• [Standard]
Select this when the communication protocol is in ASCII format.
• [BCP]
Select this when the communication protocol is in binary format.
•[TBCP]
Select this when the communication protocol are both in ASCII and binary formats
and switches between the two using control codes.
• [Binary]
Select this when no special processing is required for data.
Note
• Select an appropriate option according to the data format specified on your printer
driver.
• [Adobe Protocol] is valid only when printing in PostScript.
Item Description
Adobe Protocol Sets the PostScript communication protocol.
• [Auto]
Automatically detects the PostScript communication protocol.
• [Standard]
Select this when the communication protocol is in ASCII format.
• [BCP]
Select this when the communication protocol is in binary format.
• [TBCP] (default)
Select this when the communication protocol are both in ASCII and binary formats
and switches between the two using control codes.
• [Binary]
Select this when no special processing is required for data.
Note
• Select an appropriate option according to the data format specified on your printer
driver.
• [Adobe Protocol] is valid only when printing in PostScript.
Item Description
To Next Page
Loading...
Need help?
General
