116
Home > Network > Advanced Network Features > Configure the SNTP Protocol Using Web Based
Management
Configure the SNTP Protocol Using Web Based Management
Configure the SNTP protocol to synchronize the time the machine uses for authentication with the time kept by the
SNTP time server.
1.
Start your web browser.
2.
Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.0.2.1
3.
Type a password, and then click . The default password is "x-admin". To ensure security, it is important you
change the password.
4.
Click the Network tab.
5.
Click Protocol in the left navigation bar.
6.
Select the SNTP check box to activate the settings.
7.
Restart your Fuji Xerox machine to activate the configuration.
8.
Next to the SNTP check box, click Advanced Settings and follow the instructions below:
Option Description
Status Displays whether the SNTP protocol is enabled or disabled.
Synchronization Status Confirm the latest synchronization status.
SNTP Server Method Select AUTO or STATIC.
•AUTO
If you have a DHCP server in your network, the SNTP server will obtain the
address from that server automatically.
•STATIC
Type the address you want to use.
To Next Page
Loading...
Need help?
General
