267
Home > Routine Maintenance > Replace Periodic Maintenance Parts
Replace Periodic Maintenance Parts
Replace the following parts regularly to maintain print quality. The parts listed below must be replaced after
printing approximately 50,000 pages
1
for the PF Kit MP and 200,000 pages
1
for the PF Kit for the Paper Tray, PF
Kit for the Tray Module(s) (Optional), Fusing Unit, and Laser Unit.
Contact Fuji Xerox customer service or your local Fuji Xerox dealer when the following message appears on the
LCD:
*1
Replacement frequency depends on the complexity of printed pages, percentage of coverage, and the type of media
used.
*2
If you use the Tray Module(s) (Optional) with your machine, this message will appear on the LCD. When the machine
has multiple Tray Modules (Optional), the machine displays messages using numbers corresponding to each Tray
Module (Optional).
• Routine Maintenance
1
Letter or A4 size 1-sided pages
LCD Message Description
Replace Fuser
*1
Replace the Fusing Unit.
Replace Laser
*1
Replace the Laser Unit.
Replace PF Kit1
*1
Replace the Paper Feeding Kit for the Paper Tray.
Replace PF Kit2
*1 *2
Replace the Paper Feeding Kit for the Tray Module(s) (Optional).
Replace PF KitMP
*1
Replace the Paper Feeding Kit for the Multi-purpose Tray.
To Next Page
Loading...
Need help?
General
