Accessories for yo ur Tablet P C (opti
onal)
Intermediary VESA Mount Plate (optional)
The VESA mounting attachment kit contains the following components: The
VESA mounting attachme nt and four type M2.5XL5-1 screws.
For Tablet PC models with a VESA Shell (screw holes), an optional VESA attachment,
the intermediary VESA Mount Plate, can be attached to the rear side.
The intermed iary VESA Mo
unt Plate can be used, for example, to secure the Tablet PC
to a cart, counter or stan
d with the corresponding screw holes.
• The housing option that
supports the intermediary VESA mount plate is
not compatible with the
protective TPU cover and folio cover accessory
components. In additi
on, the respective VESA housing does not support
the following: IP54, fi
ngerprint sensor or 4G.
• Use the appropriate tool of the correct size to secure the screws.
• Keep the screws out o
f the reach of children.
2
1
1
1
1
3
3
3
3
► Remove
the covers from the screw holes on the rear of the Tablet PC (1).
► Position the intermediary VESA Mount Plate on the Tablet PC (2). Make sure
that the screw holes on the In termed iary VESA Mount Plate and on the Tablet
PC are aligned exactly on top of each o ther.
► Secu
re the Intermediary VESA Mount Plate using the screws (3).
Fujitsu 53
To Next Page
Loading...
Need help?
General