Tro ubl eshooting and tips
Stylus input not working
Cause
Troubleshooting
Incorrect driver installed.
► R einstall the driver for the "dual digitizer".
The Tablet PC does not start after switch on
TabletPC
Cause Troubleshooting
The battery is dead.
► C harge the b attery.
or
► Connect the AC adapter to the Tablet
PC.
The AC adapter is not connected properly. ► Check whether the AC adapter is properly
connected to the Tablet PC.
► Switch the Tablet PC on.
The Tablet PC stops working
TabletPCEnding
Cause Troubleshooting
The Tablet PC is in energy saving mode.
► End energy saving mode.
An application program has cau sed the
malfunction.
► Close the application program or restart
the Tablet PC (by restarting the operating
system or switching the device off and back
on again).
The battery is dead.
► C harge the b attery.
or
► Connect the AC adapter to the Tablet
PC.
The printer does not print
Printerdoesnot print
Cause Troubleshooting
The printer is not switched on. ► M ake sure that the printer is switched
on and ready for operation (refer to the
documentation supplied with the printer).
The printer is not connected correctly.
► Check t
hat the data cable between the Tablet
PC and t
he printer is properly connected.
The printer driver is faulty o r not correctly
installed, or it is the wrong printer driver.
► Check t hat the d ata cable between the Tablet
PC and the printer is properly connected.
► Check whether the correct printer driver is
loaded ( refer to the printer documentation).
Fujitsu 79
To Next Page
Loading...
Need help?
General