Connecting external d evices
USBportwithchargingfunction(USBType-C)
USBportwithchargingfunction(USBType-C™)
You can also charge a connected USB device or operate devices without an
additional power supply at this USB port.
This is also possible with the Tablet PC switched off, if the USB Type-C Power Delivery on System Off
function is activated in the Advanced - Miscellaneous Configurations menu of the BIOS Setup Utility.For
how to call up and use the BIOS Setup Utility,seeSection"
Settings in BIOS Setup Utility", Page 72.
USB devices are hot-pluggable. This means you can connect and disconnect the
cables of U SB devices while the operating system is running.
Additional information can be found in the document ation for the USB devices.
+
► Connect the data cable to the
external device.
► Connect the data cable to a USB port
(USB Type-C) on the Tablet PC.
How t o remove USB devices correctly
Always correctly remove the device according to the rules described below,
to ensure that none of your data is lost.
► Tap the symbol for safe removal of the h ardware.
► Select the device you wish to shut down and remove.
► Tap OK.
Wait for the dialog box which te lls you that it is now safe to remove the device.
70 Fujitsu
To Next Page
Loading...
Need help?
General