Accessories for your Tablet PC (opti
onal)
Protective TPU cover with shoulder strap (optional)
Components of the protective
TPU cover
The protective TPU Cover accessory options package with shoulder strap
contains the following component s:
1. Protective TPU cover
2. Shoulder strap
3. Fujitsu warranty document
4. Accessory operating in
structions
TheprotectiveTPUcov
er with shoulder strap is not compatible with the
keyboard cover and doc
king cradle accessory components.
Safety notes
• Make sure the device is fitted into the TPU cover properly in order to prevent it from falling out.
• Keep the protective TPU c over away from heaters and direct sunlight.
• Do not w ash the pro tecti ve TPU cove r. If it gets dirty, remove the protective TPU
cover from the Tablet PC, dampen a c loth with water, squeeze it well, wipe off
the dirt using the cloth and then wipe with a dry cloth.
• Do not use solvents such as benzine, thinner, alcohol, household detergents,
or chemically treated cloths.
• If the protective TPU cover gets wet, wipe off the moisture with a dry cloth and
keep it in a shaded area until completely dry.
Insert the Tablet PC into the protective TPU
cover with
shoulder strap
► If attached, remove the A C plug for the AC adapter from the power outlet and the tablet.
► Switch th
e Tablet PC o ff.
► Make sure that the terminal cover and the slot cover are tightly closed.
► If attac
hed, remove the pen tether from the tablet
54 Fujitsu