Furuno 9ZWFM4850 User Manual

DIGITAL SELECTIVE CALLING
FM-4850 Operator’s Manual
22
When the channel change mode is "AUTO"
Step 1 When a DSC Distress Alert is received, the alarm sounds. Rotate the
Menu/DSC control to stop the alarm.
The screen shows the MMSI of the vessel calling and three soft keys:
"ACCEPT", "CANCEL", and "PAUSE".
 ACCEPT: Select the soft key to continue with the call and switch to the
requested channel.
 Cancel: Select the soft key to cancel the automatic channel switching.
The radio returns to the home screen and the channel remains
unchanged.
 PAUSE: Select the soft key to pause the call and timing. You can
resume the call by pressing the "RESUME" soft key.
Step 2 Select "ACCEPT" to switch to the requested channel.
Note
If no key is pressed within 10 seconds, the radio automatically
switches to the requested channel.
Step 3 Press and hold the PTT key to talk into the handset.
When the channel change mode is "MANUAL"
Step 1 When a DSC Distress Alert is received, the alarm sounds. Rotate the
Menu/DSC control to stop the alarm.
The screen shows the MMSI of the vessel calling and two soft keys:
"ACCEPT" and "PAUSE".
 ACCEPT: Select the soft key to continue with the call and switch to the
requested channel.
 Cancel: Select the soft key to cancel the call. The radio returns to the
home screen and the channel remains unchanged.

Furuno 9ZWFM4850 Specifications

General

Brand	Furuno
Model	9ZWFM4850
Category	Cordless Telephone
Language	English