FM-4850 Operator’s Manual
DIGITAL SELECTIVE CALLING
Step 3 Select a channel.
Step 4 Press the Menu/DSC control to initiate a group call.
When CH70 is busy, you can wait without pressing any key until CH70
is idle.
When the CH70 is idle, the radio waits for an acknowledgement.
Step 5 Select "OK" to return to the home screen.
Step 6 Press and hold the PTT key to talk into the handset.
Initiate a group call from the "RECENT CALLS"
Step 1 On the "GROUP" page, select "RECENT CALLS".
Step 2 Select a group, and then press the Menu/DSC control to enter the
"SELECT CH" page.
Step 3 Select a channel.
Step 4 Press the Menu/DSC control to initiate a group call.
When CH70 is busy, you can wait without pressing any key until CH70
is idle.
When the CH70 is idle, the radio waits for an acknowledgement.
Step 5 Select "OK" to return to the home screen.
Step 6 Press and hold the PTT key to talk into the handset.
Initiate a group call by manually entering a group ID
Step 1 On the "GROUP" page, select "MANUAL ID".
Step 2 Select a group, and then press the Menu/DSC control to enter the
"SELECT CH" page.
Step 3 Select a channel.
Step 4 Press the Menu/DSC control to initiate a group call.
When CH70 is busy, you can wait without pressing any key until CH70
is idle.
When the CH70 is idle, the radio waits for an acknowledgement.
Step 5 Select "OK" to return to the home screen.
Step 6 Press and hold the PTT key to talk into the handset.
4.5.2 How to Receive a Group Call
The channel change of your radio has two modes: "AUTO" and "MANUAL".
Different channel change modes lead to different operations when you receive an
All Ships call. For information about how to set the channel change mode, see
section 12.3 Channel Change Mode.
To Next Page
Loading...
Need help?
General
