FM-4850 Operator’s Manual
13. ATIS SETUP
The FM-4850 supports the Automatic Transmitter Identification System (ATIS) used
in Inland waterways in Europe. In the ATIS mode, the radio transmits a unique ATIS
code each time the PTT key is released at the end of a transmission. You should
check with your local marine regulatory authority in your country for assistance in
obtaining an ATIS code.
13.1 How to Enter the ATIS ID
You can register an ATIS ID, and also view the registered ID, as follows:
Caution
An ATIS ID can be entered only once. Therefore, be careful not to enter the
wrong ATIS ID. If you need to change the ID after it has been entered, contact
your dealer.
Step 1 Press the Menu/DSC control until the "MAIN MENU" screen appears.
Step 2 Go to "ATIS SETUP > SET ATIS ID ".
The following page appears.
Step 3 Rotate and press the MENU/DSC control to enter your ATIS ID (nine
digits).
If you enter a wrong digit, press the BACK key until the wrong digit is
selected, and then enter a correct digit.
Step 4 After you enter the ATIS ID, press the Menu/DSC control to save it.
Step 5 Enter the ATIS ID again, and then press the Menu/DSC control to save it.
If you enter a different digit that you entered at Step 3 and press the
Menu/DSC control, automatically return to the Step 3.
To Next Page
Loading...
Need help?
General
