Furuno FCV-1900 User Manual

1. OPERATION
1-28
1.22.1 How to activate ACCU-FISH
™
Activate the ACCU-FISH
™
to show the information of the fish.
1. Press the MENU/ESC key, then open the [Setting] or [External fish finder] tab.
2. Select [Measurement], then push the ENTER knob.
3. Select [ACCU-FISH], then push the ENTER knob.
4. Select [Symbol] ([Setting] tab) or [On] ([External fish finder] tab), then push the
ENTER knob.
For the [Setting] tab, the menu items below [Mark Display] become active after ac-
tivating the ACCU-FISH
™
.
5. Press the MENU/ESC key several times to close the menu.
Note: To hide the fish symbol, select [Off] at step 4. When [ACCU-FISH] is changed
to [Off] or [Graph], all data measured for it is deleted.
1.22.2 Fish symbols
There are two types of fish symbols: , . The fish symbols are shown on the
following displays.
• High frequency screen on the dual frequency display.
• High frequency screen or external fish finder screen on the user display.
1. Press the MENU/ESC key, then open the [Setting] tab.
2. Select [Measurement], then push the ENTER knob.
3. Select [Fish Symbols], then push the ENTER knob.
4. Select [Fish Mark] or [Point Mark], then push the ENTER
knob.
You can show the fish information figure alone (without fish
symbol) by turning off [Fish Symbols].
5. Press the MENU/ESC key several times to close the menu.
For [Setting] tab
For [External fish finder] tab
Setting
Sounder
Display
Measurement
System
ACCU-FISH On
BBDS1
Telesounder
Setting
Sounder
Display
Measurement
Alarm
Data
System
ACCU-FISH
[Graph Display]
Graph Style
Graph Size
Graph Location
Graph Scale End
Distributed Scale Start
Distributed Scale End
Number of graph bars
Transparency
Updating Cycle
[Mark Display]
Fish Info
Fish Symbols
Mark
Horizontal
Small
Upper Left
39inch
3%
50%
Max.16 bars
Off
3s
Size
Fish Mark
BBDS1
Telesounder
Off
Fish Mark
Point Mark

Furuno FCV-1900 Specifications

General

Brand	Furuno
Model	FCV-1900
Category	Fish Finder
Language	English