Furuno FM-4850 User Manual

DSC SETUP
FM-4850 Operator’s Manual
72
12.8 Timeout
This feature allows you to set the number of minutes the radio should keep a given
screen displayed before it restores the standby display, if no radio operation is
detected.
You can set a timeout for two types of screen: the non-distress screen and the
distress transmitting screen.
Step 1 Press the Menu/DSC control until the "MAIN MENU" screen appears.
Step 2 Go to "DSC SETUP > TIMEOUT ".
The "TIMEOUT" page appears on the screen.
Step 3 Select "NON DISTRESS" or "RX DISTRESS".
Step 4 Do one of the following:
 To enable the Timeout feature, select "15 MIN ".
The message selected at step 4 is closed automatically when there is
no operation within 15 minutes.
 To disable the Timeout feature, select "NO TIMEOUT ".
Step 5 Press the Menu/DSC control to save the setting and return to the
previous screen.

Furuno FM-4850 Specifications

General

Brand	Furuno
Model	FM-4850
Category	Cordless Telephone
Language	English