1. INITIAL SETTING AND ADJUSTMENT
1-34
• Where [HUB Port Setting] ([Monitoring Type] = [Monitor Ports])
• Where [HUB Alert Setting] ([Monitoring Type] = [Monitor Units])
5. To save the configuration, perform a consistency check, then save the configura-
tion data on the [Save and Sync] menu.
Item Remarks
Checkbox Check the checkbox for the port which generates the alert
when the connection is interrupted.
[Port] HUB port number.
[Alert No.] When the alert notification sentence is in ALR format, the
alert number is shown.
When the alert notification sentence is in ALF format, the
alert number and the Instance ID are shown.
Click the [ ] button to open the [Alert No. Setting] win-
dow. Set the output alert on the [Alert No. Setting] window.
Check the radio button for the desired alert and click the
[OK] button.
[Alert Name] Alert name of each HUB port
Item Remarks
[Alert No.] When the alert notification sentence is in ALR format, the
alert number is shown.
When the alert notification sentence is in ALF format, the
alert number and the Instance ID are shown.
Click the [ ] button to open the [Alert No. Setting] win-
dow. Set the output alert on the [Alert No. Setting] window.
Check the radio button for the desired alert and click the
[OK] button.
[Alert Name] Name of the alert set for each port.
Drop down list Select the equipment ID(s) for the equipment connected
with the HUB-3000.
To Next Page
Loading...
Need help?
General
