Garmin FENIX 6 PRO Series User Manual

Sensors Settings
Compass Settings
Hold MENU, and select Sensors & Accessories > Compass.
Calibrate: Allows you to manually calibrate the compass sensor (Calibrating the Compass Manually, page91).
Display: Sets the directional heading on the compass to letters, degrees, or milliradians.
North Ref.: Sets the north reference of the compass (Setting the North Reference, page91).
Mode: Sets the compass to use electronic-sensor data only (On), a combination of GPS and electronic-sensor
data when moving (Auto), or GPS data only (Off).
Calibrating the Compass Manually
NOTICE
Calibrate the electronic compass outdoors. To improve heading accuracy, do not stand near objects that
influence magnetic fields, such as vehicles, buildings, and overhead power lines.
Your watch was already calibrated at the factory, and the watch uses automatic calibration by default. If you
experience irregular compass behavior, for example, after moving long distances or after extreme temperature
changes, you can manually calibrate the compass.
1 Hold MENU.
2 Select Sensors & Accessories > Compass > Calibrate > Start.
3 Follow the on-screen instructions.
TIP: Move your wrist in a small figure eight motion until a message appears.
Setting the North Reference
You can set the directional reference used in calculating heading information.
1 Hold MENU.
2 Select Sensors & Accessories > Compass > North Ref..
3 Select an option:
• To set geographic north as the heading reference, select True.
• To set the magnetic declination for your location automatically, select Magnetic.
• To set grid north (000º) as the heading reference, select Grid.
• To set the magnetic variation value manually, select User, enter the magnetic variance, and select Done.
Altimeter Settings
Hold MENU, and select Sensors & Accessories > Altimeter.
Calibrate: Allows you to manually calibrate the altimeter sensor.
Auto Cal.: Allows the altimeter to self-calibrate each time you use satellite systems.
Sensor Mode: Sets the mode for the sensor. The Auto option uses both the altimeter and barometer according
to your movement. You can use the Altimeter Only option when your activity involves changes in altitude, or
the Barometer Only option when your activity does not involve changes in altitude.
Elevation: Sets the units of measure for elevation.
Customizing Your Device 91

Garmin FENIX 6 PRO Series Specifications

General

Display Resolution	260 x 260 pixels
Display Type	Sunlight-visible, transflective memory-in-pixel (MIP)
Case Material	Fiber-reinforced polymer with metal rear cover
Strap Material	Silicone
Water Rating	10 ATM
Memory	32 GB
Connectivity	Bluetooth, ANT+, Wi-Fi
Music Storage	Up to 2, 000 songs
Lens Material	Corning Gorilla Glass DX
Bezel Material	Stainless steel
Quickfit Watch Band Compatible	Yes (22 mm)
Physical Size	47 x 47 x 14.7 mm
Display Size	1.3" (33.0 mm) diameter
Weight	83 grams
Battery Life	Smartwatch: Up to 14 days; GPS: Up to 36 hours; GPS + Music: Up to 10 hours; Max Battery GPS Mode: Up to 72 hours; Expedition GPS Activity: Up to 28 days; Battery Saver Watch Mode: Up to 48 days
Sensors	GPS, GLONASS, Galileo, heart rate monitor, compass, gyroscope, accelerometer, thermometer
Smart Features	Smart notifications, Text response/reject phone call with text (Android only), Calendar, Weather, Controls smartphone music, Find My Phone, Find My Watch, VIRB Camera Remote, Smartphone compatibility, Garmin Pay
Compatibility	Android, iOS