GTS 8XX/GPA 65 Installation Manual Page 3-5
190-00587-00 Revision 4TP
3.4 Backshell, Pigtail Circular Connector, and Configuration Module
Assemblies
The GTS 8XX connector kits includes three Garmin backshell assemblies. The backshell assembly
houses the configuration module, if applicable. Garmin’s backshell also gives the installer the ability to
easily terminate shield grounds at the backshell housing.
Refer to the Jackscrew Backshell Installation Instructions (Garmin part number 190-00313-11) for
backshell assembly instructions.
Refer to the GPA 65 Pigtail Circular Connector Installation Instructions (Garmin part number
190-00313-XX) for pigtail assembly instructions.
Refer to the Jackscrew Configuration Module Installation Instructions (Garmin part number
190-00313-10) for configuration module assembly instructions.
3.5 Unit Installation
Refer to the outline and installation drawings shown in Appendix A of this manual
To Next Page
Loading...
Need help?
General
