Real-Time Unit
The system can be equipped with a Real-Time Unit, which must be installed by a GE
Healthcare service representative. The Real-Time Unit can be used in certain network
environments to make sure the run continues if the computer is rebooted or otherwise
locked due to, for example, software updates. The method is automatically downloaded
to the Real-Time Unit when the method is started. Instructions are sent from the Real-Time
Unit to the instrument and data are collected in the Real-Time Unit during the run. The
result is uploaded from the Real-Time Unit to the computer when the connection is re-
stored.
26 ÄKTA go Operating Instructions 29360951 AC
3 System description
3.2 Available modules
To Next Page
Need help?
General
