5 Prepare the system for a run
About this chapter
This chapter gives instructions on how to prepare the ÄKTA go system for a run and
what to do before the first run.
Safety precautions
WARNING
Explosion hazard. To avoid building up an explosive atmosphere
when using flammable liquids, make sure that the room ventilation
meets the local requirements.
CAUTION
Fire hazard. Before the system is turned on, make sure that there
is no unintentional leakage of flammable liquids in ÄKTA go.
In this chapter
This chapter contains the following sections:
See pageSection
615.1 Prepare the flow paths
645.2 Prime inlets and purge pump heads
705.3 Performance tests
745.4 Connect a column
775.5 Pressure alarms
785.6 Prepare for a run at low temperature
60 ÄKTA go Operating Instructions 29360951 AC
5 Prepare the system for a run
To Next Page
Loading...
Need help?
General
