GE LOGIQ V5/LOGIQ V3
D
IRECTION 5496012-100, REVISION 3 BASIC SERVICE MANUAL
4 - 24 Section 4-3 - General Procedure
4-3-12 Using Cine
4-3-12-1 Activating CINE
Press Freeze, then roll the Trackball to activate CINE. To start CINE Loop playback, rotate Run/Stop
button. To stop CINE Loop playback, rotate Run/Stop button.
4-3-12-2 Quickly Move to Start/End Frame
Rotate First button to move to the first CINE frame; rotate Last button to move to the last CINE frame.
4-3-12-3 Start Frame/End Frame
Rotate the Start Frame button to move to the beginning of the CINE Loop. Rotate the Start Frame
clockwise to move forward through the CINE Loop. Rotate the Start Frame anticlockwise to move
backward through the CINE Loop.
Rotate the End Frame button to move to the end of the CINE Loop. Rotate the End Frame button
clockwise to move forward through the CINE Loop. Rotate the End Frame anticlockwise to move
backward through the CINE Loop.
4-3-12-4 Adjusting the CINE Loop Playback Speed
Rotate the Loop Speed button to increase/decrease the CINE Loop playback speed.
4-3-12-5 Moving through a CINE Loop Frame By Frame
Rotate the Frame by Frame button to move through CINE memory one frame at a time.
To Next Page
Loading...
Need help?
General
