GE LOGIQ V5/LOGIQ V3
D
IRECTION 5496012-100, REVISION 3 BASIC SERVICE MANUAL
Chapter 3 - System Setup 3 - 1
Chapter 3
System Setup
Section 3-1
Overview
3-1-1 Purpose of Chapter 3
This chapter contains information needed to install the unit. Included are references to a procedure that
describes how to receive and unpack the equipment and how to file a damage or loss claim.
How to prepare the facility and unit of the actual installation, and how to check and test the unit and
external peripherals for electrical safety are included in this procedure. Also included LOGIQ V5/LOGIQ
V3 in this section are guidelines for transporting the unit to a new site.
Table 3-1 Contents in Chapter 3
Section Description Page Number
3-1 Overview 3-1
3-2 Setup Reminders 3-2
3-3 Receiving and Unpacking the Equipment 3-5
3-4 Preparing for Installation 3-10
3-5 Completing the Installation 3-11
3-6 System Configuration 3-13
3-7 Software/Option Configuration 3-7
3-8 Connectivity Installation Worksheet 3-25
3-9 Loading Base Image Software 3-26
3-10 Software Version check out 3-27
3-11 Paperwork 3-28
To Next Page
Loading...
Need help?
General
