GE LOGIQ V3 Service Manual

GE LOGIQ V5/LOGIQ V3
D
IRECTION 5496012-100, REVISION 3 BASIC SERVICE MANUAL
Chapter 4 - Functional Checks 4 - 19
4-3-9 Color Flow Mode Checks
NOTE: Color Flow Mode only support by LOGIQ V5.
4-3-9-1 Preparations
1.) Connect one of the probes listed in 3-6-6 "Available Probes" on page 3-24, in Chapter 3 Installation
to the System probe connector.
2.) Turn ON the scanner (if it isn’t turned on already).
Figure 4-14 Controls available in Color Flow Mode
Figure 4-15 CFM Mode Screen Picture Example

GE LOGIQ V3 Specifications

General

Brand	GE
Model	LOGIQ V3
Category	Medical Equipment
Language	English