GE NetworX NX-1192E User Manual

12
6.
Repeat steps 4 and 5 for any other zone(s) that need to be bypassed.
7.
Press
BYPASS
again OR press

to exit the Bypass Mode. The
bypass light
will stop flashing upon exiting the Bypass Mode. Pressing
x
and
y
will
display all bypassed zones. Press

to exit.
PROCEDURE #2: If you do not know the number of the zone you wish to bypass, use
the following steps:
1.
Press
À
x
. The description for zone 1 will be displayed.
2.
Use
x y
to browse through the custom descriptions for the zones in this
system.
3.
To bypass or unbypass a specific zone, press
BYPASS
while that zone is
displayed.
4.
When finished, press

to return to the code entry screen.
VI. GROUP BYPASS
By pressing
BYPASS
W
BYPASS
, all zones that are designated as group bypass
zones will be bypassed. Press
BYPASS
again to exit group bypassing.
VII. UNBYPASSING
To manually unbypass zones, perform the bypassing procedure on a zone that is
already bypassed.
NOTE:
All zones will automatically be unbypassed each time the
system is disarmed.

GE NetworX NX-1192E Specifications

General

Brand	GE
Model	NetworX NX-1192E
Category	Keypad
Language	English