– 60 –
3-Way Valve Coil
The 3-way valve coil is attached to the top of the
3-way valve.
To remove the 3-way valve coil:
1. Remove the machine compartment cover. (See
Machine Compartment Cover.)
2. Remove the 1/4-in. hex-head screw that
attaches the 3-way valve bracket and spacer to
the refrigerator.
3. Carefully reposition 3-way valve and drier to
gain better access to the condenser fan and
valve wire harnesses.
4. Disconnect the wire harness attached to the
back of the 3-way valve coil.
5. Disconnect the fan and valve wire harness from
the cabinet.
6. Using a fl at blade screwdriver, simultaneously
pry out the tab and lift the 3-way coil from the
valve assembly.
Disconnect
Disconnect
Spacer (behind bracket)
6. Grasp and pull the condenser fan straight out
from guides in the fan plenum.
Note: In the following step, the upper and lower
fan guides in the fan plenum will expand when the
condenser fan is pulled out.
Upper Fan Guide
Lower Fan Guide
Fan Plenum
Fan Removed
To Next Page
Loading...
Need help?
General
