– 67 –
Ice Box Door Assembly
The ice box door assembly consists of the door,
latch, and gasket.
The ice box door assembly is attached to the left-
side refrigerator door with 2 hinges. To remove the
ice box door assembly, it is necessary to open the
door and remove the two T-15 Torx screws and the
top hinge. The door assembly can then be lifted off
the bottom hinge.
Door Latch
Door Gasket
Door Panel
Top Hinge
The door latch cover must be removed to access the
latch to the ice box door. The cover is attached to
the door with 2 rear tabs and 2 front tabs. A small
fl at blade screwdriver can be used to pry out the
front of the latch cover.
The cover can then be pulled toward the latch
handle and removed.
Door Latch Cover
(Continued next page)
To Next Page
Loading...
Need help?
General
