GE Profile J2S968 SERIES User Manual

– 33 –
FAN
BLADE
OVEN
LINER
ELEMENT
OVEN
INSULATION
OUTER
BACK
PANEL
CONV.
FAN
(3)
SCREWS
(4)
SUPPORT
OVEN
CAVITY
MOUNTING
SCREWS
(3)
CONV.
FAN
MTG.
SCREWS
FAN
BLADE NUT
E
b
e
v
t
n
FAN
BLADE
OVEN
LINER
OVEN
INSULATION
OUTER
BACK
PANEL
CONV.
FAN
(3)
SCREWS
(4)
SUPPORT
OVEN
CAVITY
MOUNTING
SCREWS
(3)
CONV.
FAN
MTG.
SCREWS
FAN
BLADE NUT
A
All Gas Range Convection Fan AssemblyDual Fuel Range Convection Fan Assembly
Convection Fan Assemblies
The convection fan assembly consists of the fan guard, element (Dual Fuel Range), fan blade, and
motor. It is located on the back wall of the oven.
Refer to the schematic in the back of this manual for circuitry for your specific model.
Note: The JGSP48 All Gas Range models do not have convection fans.
Fan Cycle Information
All times are in seconds.
Convection Fan Operation - All times are in seconds
CW Rotation Pause/Off CCW Rotation
Pause/Off
Convection Bake
Single rack
180 10 180 10 Repeat
Convection Bake
Multi rack
20 30 40 30 Repeat
Convection Roast 0 0 Continuously 0
The convection fan will not come on while there is a call for heat from the thermostat (gas burner on).
Fan will only start to operate 10 seconds after the burners turn off.
The fan will only run in one direction with the following parameters:
High Speed Low Speed Pause/Off
Convection Bake 3 7 50 Repeat
Convection Roast Continuousl
y
00
Dual Fuel
All Gas

GE Profile J2S968 SERIES Specifications

General

Brand	GE
Model	Profile J2S968 SERIES
Category	Ranges
Language	English